Jinma tractor king 200
kubota1600
Join Date: Dec 2015 Posts: 2 |
2015-12-07 194167
Working on this for a family member... Gauges have never worked on this tractor so I have replaced all relays and fuses, checked every connection cleaned and reconnected and still nothing. The gauges will light up and all lights, blinkers, and horn still work but, theirs no oil pressure, temp,or rpm readings and the hour meter says error. Im at a loss the only thing i've found is a ground that is not hooked up so, i scuffed off the paint stuck it on the frame and it got me no where lol.
Any help would be greatly appreciated!
Reply to | Quote Reply | Add Photo
Jinma tractor king 200
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2015-12-10 194180
Saying they never worked..since new or new to them meaning did they get it used?
Hard to believe four sending units would all be bad but possible. I would try to test with volt meter and see if you can detect any voltage change on oil pressure sending unit from not running to idling. If none then think sending unit is bad. Again hard to believe all four sending units are bad unless there was a voltage spike to the system.
Is there a connection where all the wires are in a single plug and by change it is not plugged in correctly, like it is roated 180 degrees throwing all circuits off? ....
Reply to | Quote Reply | Add Photo
Go Top
Share This